Harbor Trash Collector for Ports and Floating Debris Removal

A harbor trash collector works where wind and current push trash into the same corners every day. The Marina Trash Skimmer mounts to a floating dock and runs 24/7, pulling a brochure-rated 300+ gallons of surface water per minute through a removable basket.

KECO Pump & Equipment · San Diego since 1954 · Sales, installation support and service

What does a harbor trash collector do for a port?

Ports collect floating debris from stormwater outfalls, vessel traffic and wind-driven drift. A crew boat can clear it, but trash comes back between rounds. A fixed harbor trash collector works the same spot around the clock: the pump draws a surface current, water passes back out, and plastics, bottles, foam, leaves and light oil sheen stay in the basket until staff empty it.

Marina Trash Skimmer installed in the water along a marina dock
A Marina Trash Skimmer installed along a dock. Crews open the lid and lift the basket out to empty it.

Harbor unit specifications

Water flow300+ gal/min
Power125 V, 20 A circuit
Energy useAbout 25 kWh per day
Footprint6 ft W × 4 ft D
Freeboard18 in
MountingFloating dock, brackets included
Debris basketRemovable, lifts out without tools
DutyContinuous, with manual pause

Flow, power, energy and installation figures per the KECO MTS product brochure, reproduced in the product specifications. Confirm flow and basket sizing for your site with KECO.

Where are skimmers already working at ports?

Port of Los Angeles

The LA Harbor Department lists nine trash skimmers in its TMDL implementation record, deployed in marinas and other parts of the Port where wind and water flow push trash into hard-to-reach corners. Read the Port of Los Angeles case study.

San Diego Bay

The Port of San Diego began a bay program in 2009 with skimmers at Pier 32, Point Loma, Half Moon and Cabrillo Isle marinas. In 2023 a San Diego County grant helped fund two more at Coronado Cays. Read the San Diego Bay case study.

Working harbors

Dana Point Harbor runs 6 units that collect about 45,000 lbs of debris a year, and New Bedford, a commercial fishing port, launched a unit in its harbor in 2019 with its Port Authority among the partners. Dana Point · New Bedford

How is a harbor skimmer serviced?

Basket emptying

  • High-debris areas may need the basket emptied daily
  • Cleaner waters may need it weekly or every other week
  • Runtime statistics on the control panel help set the schedule

Controls and cycles

  • Touchscreen control panel at the dock
  • Run mode repeats a forward run and a reverse backflush of the intake
  • Pause time stops the pump for a set number of hours

Installation

  • 6 ft W × 4 ft D footprint with 18 in freeboard
  • Mounts to a floating dock with the brackets provided
  • Standard 125 V, 20 A circuit

Which harbor locations suit a skimmer?

Placement decides results. Good sites are protected corners and dock ends where wind and current already gather trash. Exposed entrance channels with steady boat wake are poor sites: the Kewalo Harbor case study explains why a 2016 unit in Honolulu was removed. KECO now checks wave exposure, vessel traffic and water movement at every proposed location before recommending a unit. For the full range of cleanup approaches, read the marina debris removal guide; for a side-by-side look at other methods, see the cleanup comparison, and for funding options see the marina debris removal grant hub.

Plan floating debris removal for your port

Send the harbor location, where debris collects, basin photos and any power constraints. KECO will recommend locations and a unit count, and supply the specifications a procurement or grant file needs.

Request a Quote

Last reviewed